A MODIFICATION LIMIT EQUILIBRUM SOLUTION FOR MINE BACKFILL ANALYSIS IN SEMI CUBE STOPE

Ashabul Kahfi, Revia Oktaviani, Shalaho Dina Devy

Abstract


Mine backfill is a material that is used to fill the empty stope in an underground mine for ground control stability and to reduce ore dilution. Generally, the backfill consists of mining waste materials and ore tailings, which are added to a binder such as cement. Problems that often appear in the mining cycle using stope and backfill are the stability of the backfill on the primary stope when exposing the secondary stope. Previous researchers suggested analyzing the stability of the backfill on the narrow stope. In some cases, a semi-cube stope is often found. Obviously, the potential failure dimension, which acts as the driving force of the backfill in the semi-cube stope, is smaller than the narrow stope. This study was meant to develop a method for analyzing the stability of the backfill on the semi-cube stope by calculating the driving force according to the failure potential dimensions that could potentially occur and simulating it with numerical modeling using FEM.

Keywords


Mine Backfill, Limit Equilibrium, Semi Cube Stope

Full Text:

PDF

References


AMC Consultant, 2011, Technical Report on The Gosowong Property in North Maluku Province Indonesia, Vancouver, AMC Consultant Ltd.

Aubertin, M., Li, Li., Arnoldi, S. dan Simon, R., 2003, Interaction Between Backfill and Rock Mass in Narrow Stopes, Soil and Rock Mechanics America, P. 1157-1164.

Belem, T. dan Benzaazoua, M., 2004, An Overview on the use Paste Backfill Technology as a ground support method in Cut and Fill Mines, Ground Support in Mining and Underground Construction, P. 637-650.

Dominy, S.C., Sangster, C.J.S., Camm, G.S. dan Phelps, R.F.G., 1998, Narrow Vein Stoping Practice, Mining Technology IMM Transactions Section A : Australasian Institute of Mining and Metallurgy, P. 122-136.

Karim, R., Simangunsong, G.M., Sulistianto, B. Dan Lopulalan, A., 2013, Stability Analysis of Paste Fill as Stope Wall using Analytical Method and Numerical Modelling in The Kencana Underground Gold Mining with Long Hole Stope Method, Procedia Earth Planetary and Science, Vol.6, P. 474-484.

Levesque, Y., Saeidi, A. dan Rouleau, A., 2017, An Earth Pressure Coefficient based on The Geomechanical and Geometric Parameter of Backfill in Mine Stope, International Journal of Geo-Engineering, Vol.5, P.321-328.

Li, L., 2014, Generalized Solution For Mining Backfill Design, International Journal of Geomechanics, Vol.14:3, P. 1-11.

Li, L. dan Aubertin, M., 2012, A Modified Solution to Asses The Required Strength of Exposed Backfill in Mine Stope, Canadian Geotechnical Journal, Vol.49:8. P. 994-1002.

Li, L. dan Aubertin, M., 2014, An improved method to assess the required strength of cemented backfill in underground stopes with an open face, International Journal of Mining Science and Technology, vol. 24: 4, P. 549–558.

Li, Li., Aubertin, M., Simon, R., Bussiere, B. dan Belem, T., 2003, Modelling Arching Effect in Narrow Backfilled Stopes with FLAC, Proceedings of the 3rd International Symposium on FLAC and FLAC3D Numerical Modelling in Geomechanic, Boca, CRC Press. P. 211-219.

Mitchell, R.J., Olsen, R.S. dan Smith, J.D., 1982, Model Studies on Cemeneted Tailings used in Mine Backfill, Canadian Geotechnical Journal, Vol.19. P.14-28.

Mitchell, R.J., 1983, Earth Structures Engineering, Boston, Allen & Unwin Inc.

Rocscience, 2001, Application of The Finite Element Method to Slope Stability, Toronto, Rocscience Inc.

Yilmaz, E. dan Fall, M., 2017, Paste Tailings Management. Switzerland, Springer International Publishing.




DOI: https://doi.org/10.36986/impj.v6i1.90
Abstract views : 121 | views : 77

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.