ANALISIS KONSUMSI BAHAN BAKAR ALAT ANGKUT UD QUESTER CWE 370 DALAM KEGIATAN PENGANGKUTAN BIJIH NIKEL

Hendra Rujiadi Adha

doi:10.36986/impj.v5i1.57

ANALISIS KONSUMSI BAHAN BAKAR ALAT ANGKUT UD QUESTER CWE 370 DALAM KEGIATAN PENGANGKUTAN BIJIH NIKEL

Hendra Rujiadi Adha

Abstract

PT. X is a mining contractor company located in North Morowali Regency, Central Sulawesi Province. Transport activities use a combination of excavator PC300 and UD Quester CWE370. Based on the results of the study, there are several haul road geometries that do not meet the standards that have a road slope of more than 8%. Other factors that affect the increase in fuel consumption are; acceleration, RPM, engine brake horsepower and workload. The problem that appear is that the consumption and/or fuel ratio exceeds the company's standards, data recorded in March 2021 that the consumption and fuel ratio of transportation equipment reached 13.63 liters/hour and 0.47 liters/BCM from the company standard of 8 liters/hour and 0.27 liters/BCM. The analysis was conducted to determine the effect of haul road conditions on the fuel consumption of conveyances. The theoretical calculation of fuel consumption is carried out using two methods, that is based on rimpul and RPM. It is known that fuel consumption based on rimpul calculation is 12.10 liters/hour, while based on RPM is 18.84 liters/hour. After making improvements to the geometry of the road will reduce fuel consumption and increase productivity. Based on these calculations and recommendations, fuel consumption uses rimpul calculations, namely; 12.45 liters/hour, while the fuel ratio is 0.28 liters/BCM..

Keywords

Consumption and fuel ratio, rimpul, RPM, and road geometry.

Full Text:

PDF

References

Burger, P. A., 1996. Origins and Characteristic of Lateritic Deposits. Proseding nickel’96 PP 179 – 183 the australisian institute of mining and metallurgy. Meulbourne.

Burt, C. 2014. Model for Mining Equipment Selection, Curtin University of Teknology, Perth, Australia.

Cahit, H., Selahattin, K., Necip G, Tolga Q, Ibrahim G, Hasan S, Osman P., 2017. Mineralogy and genesis of the lateritic regolith related Ni-Co deposit of the Çaldağ area (Manisa, western Anatolia), Turkey. Canadian Journal of Earth Sciense.

Coffey, J., Nikraz, H., dan Leek, C. 2015. Haul road rolling resistance and pavement condition. Civil Engineering, (16) : 12-22.

Dindarloo, S.R., dan Irdemoosa, E.S. 2016. Determinant of fuelconsumption in mining trucks. Energy, (112) : 232 – 240.

Evans, L.R., Junior, J.D.M., Yates, K., Dudek, W., Holmes, J., Popio, J., Rice, D., and Salaani, M.K. 2009. Effect of Tire Rolling Resistance Levels on Traction. Treadwear, and Vehicle Fuel Economy. United Satets Department of Transportation.

Gaspersz, V. 1991. Teknik Analisis dalam Penelitian Percobaan 2. Bandung : CV. Armico

Golbasi, O., dan Kina, E. 2022. Haul truck fuel consumption modeling under random operating conditions. Transpotation Research Part D, (102) : 1 - 21 .

Harmmarstrom, U., Eriksson, J., Karlsson, R., Yahya, M.R. 2012. Rolling resistance model, fuel consumption model and the traffic energy saving potential from changed road surface conditions. VTI rapport 748A, Swedish National Road and Transport Research Institute (VTI). Linköping: Sweden

Hartman, H. 1987. Introductory Mining Engineering. The University of Alabama. Tuscaloska Alabama.

Hermans, B. 2017. Propertis Geometri Silinder Motor Bakar, http://www.google.com/geometrisilinder, (diakses tanggal 28 Desember 2021).

Hustrulid, W., dan Kutcha, M. 1998. Open Pit Mine Planning & Design Volume 1. Rotterdam.

Indonesianto, Y. 2014. Pemindahan Tanah Mekanis. Program Studi Teknik Pertambangan, UPN ‘Veteran’ Yogyakarta:Yogyakarta.

Kaufman, Walter , W., dan James , C.A. 1977. Design Of Surface Mine Haulage Roads. United States Bureau of mines: Washington DC.

Kementrian Energi dan Sumber Daya Mineral. 2018. Kepmen ESDM Nomor 1827 K/30/MEM/2018 Tentang Pedoman Pelaksanaan Kaidah Teknik Pertambangan yang Baik. Indonesia

Komatsu. 2009. Specifications and Application Handbook Edition 30. Komatsu, Japan.

Lintjewas Lediyantje, Setiawan Iwan, dan Kausar Andrie Al. 2019. Profil Endapan Nikel Laterit di Daerah Palangga, Provinsi Sulawesi Tenggara. Ris. Geo. Tam, 29, (1): 91-104.

Nainggolan, T.B, Hermansyah, G.M, Wijaya, P.H. 2017. Struktur Geologi Perairan Morowali – Teluk Kendari dari Hasil Interpretasi Penampang Migrasi Seismik 2D. Geologi Kelautan, 15 (1) : 33-48

Nurrochman, B. 2019. Analisis Konsumsi Bahan Bakar Alat Komatsu HM 400-3R Pada Pengupasan Overburden Bulan Maret 2019 Tambang Batubara di Pit GS Jobsite LHI PT. Mitra Indah Lestari. Yogyakarta : UPN “Veteran” Yogyakarta.

Patrick, C., Jarrad, Hamid, N., dan Colin, L. 2018. Haul Road Resistance and Pavement Condition. Australian Journal of Civil Engineering.

Patrick, C., Jarrad. 2015. Mine Haul Rolling Resistance Influence and Impacts. Curtin University.

Peurifoy, R.L. 1998. Construction Planning Equipment and Metods. McGraw-Hill: New York

Pratiksa, D. 2019. Kajian Teknis Pengaruh Kemiringan Jalan Angkut Terhadap Konsumsi Bahan Bakar Truk Jungkit Pada Pengupasan Lapisan Penutup di Tambang Batubara PT. Satria Bahana Sarana Tanjung Enim. Sumatera Selatan : UPN “Veteran” Yogyakarta.

Prodjosumarto, P. 1983. Pemindahan Tanah Mekanis. Departemen Tambang, Institut Teknologi Bandung, Bandung.

Rusmana, E., Koswara, A., Simandjuntak, T.O., 1993. Peta Geologi Lembar Luwuk, Sulawesi, Skala 1:250.000. Pusat Penelitian dan Pengembangan Geologi.

Scoot, W., Graeme. 1994. The Rolling Resistance of Articulated Dump Truck On Hauls Road. University of Edinburgh.

Simandjuntak, T.O. dan Rusmana, E., 1997. Collision mechanism between the oceanic and continental terranes in the Southeast private arm of Sulawesi, eastern Indonesia. Bulletin Geology Research and Development Centre, 21, h. 109-125.

Soofastei, A., Saiied Mostofa Aminossadati, Kizil Mehmet Siddik, and Knights Peter. 2016, Reducing Fuel Consumption of Haul Truck in Surfaces Mines Using Artificial Intellegence Models. University of Wollowong Australia.

Sulistyana, W. 2017. Perencanaan Tambang. Prodi Teknik Pertambangan. UPN “Veteran” Yogyakarta. Daerah Istimewa Yogyakarta.

Sundari dan Woro., 2012, Analisis Data Eksplorasi Bijih Nikel Laterit Untuk Estimasi Cadangan dan Perancangan PIT pada PT. Timah Eksplorasi Di Desa Baliara Kecamatan Kabaena Barat Kabupaten Bombana Provinsi Sulawesi Tenggara, Universitas Nusa Cendana: Kupang.

Supriatna, S., Sukardi, dan Rustandi, E. 1995. Geological Map Of The Samarinda Sheet, Kalimantan 1:250.000 Scale. Geological Research And Development centre 1995.

Suwandhi, A. 2014. Perencanaan Jalan Tambang. Diktat Perencanaan Tambang Terbuka. Unisba: Bandung.

Syafrizal, 2011. Karakterisasi Mineralogy Endapan Nikel Laterit di daerah Tinanggea Kabupaten Palangga Provinsi Sulawesi Tenggara. JTM. XVIII (4/2011)

Tannant Dwayne and Regensburg Bruce. 2001. Guidelines for Mine Haul Road Design. University Of British Colombia: Canada.

Tonggiroh, A., Mustafa, M., Suharto, 2012. Analisis Pelapukan Serpentin dan Endapan Nikel Laterit Daerah Pallangga Kabupaten Palangga Sulawesi Tenggara.

Uicker, J .dan G. R. Pennock, 2003. Theory of Machine and Mechanism 3rd Edition, Oxford University Press. New York.

Wang, Q., Zhang, R., Lv, S., dan Wang, Y. 2021. Open – pit mine truck fuel consumption pattern and application based on multi – dimensional features and XGBoost. Sustainable Energy Tecnologies and Assessment, (43) : 1 – 10.

DOI: https://doi.org/10.36986/impj.v5i1.57